ADR EMF Sol Powder

Our new release to the ADR product line is the ADR EMF Sol Powder (2021). Its purpose is to reinforce the dielectric properties of the ADR Mats and ADR TEX Mats after being washed OR adding EM dielectric properties to ordinary cloth textiles such as clothing, curtains, bedding and other fabric materials.

By using the ADR Sol Powder, you can extend and maintain the life of your ADR Mats and ADR TEX Mats EM absorption/reflection properties and add these properties to ordinary fabrics.

ADR EMF Sol Powder Directions

Application: the fabric can be washed by hand or in an automatic washing machine, using your usual washing detergent. After washing and spin drying, the fabric should be reactivated by handwash or machine wash by adding ADR Sol EMF Powder to water and then soaking the fabric for at least 5 minutes.

Dissolve a 60 gm sachet of ADR EMF Sol Powder in 3 liters of lukewarm water either in the washer or appropriately sized basin. Soak fabrics, clothes, bedding or other cloth items for 5 minutes. You can spin dry or hang-dry and then iron.

Any fabrics washed or soaked in the ADR EMF Sol solution will give protection against electric fields.

Impregnation (soaking): the effect of the “reactivation” will increase the amount of “trapped” water molecules in the porous and tubular structures of the fabric. This treatment will fully restore the shielding properties of the low-frequency electric field through dielectric loss (absorption). Thanks to this procedure, ADR TEX and other activated materials by ADR Sol do not require grounding and have a beneficial protective effect upon living organisms, as shown in the published medical and biological research articles which can be found on the links below:

Effect of low-frequency electric field screening on motility of human sperm.

Effects of electromagnetic fields and their shielding on the growth of dwarf runner beans.

Benefits of Using the ADR EMF Sol Powder

As shown in the published studies, using the ADR EMF Sol Powder has a beneficial and protective effect on living organisms. Another positive benefit is ADR TEX products, i.e., Mats, Chair Mat and Pads, don’t require grounding.

Commonly used electric field screens use conductive materials. These are foil or metal mesh screens, silver-coated fabrics and textiles with interwoven metal wires, but they do not have the shielding capacity associated with high dielectric loss (absorption). Such materials need to be grounded when used for shielding 50/60 Hz low frequency electric fields. This frequency occurs in electrical installations in our homes and offices. It is not always possible to connect the shielding materials to an earth, especially in: mattresses, quilts, pillows, clothes, shoes and curtains, etc.

Moreover, if such screens are grounded, you need to know that between the source (e.g. a bedside lamp, and an earthed shield, a bed or mattress cover) the electric field intensity will increase. This can actually cause greater exposure to EMFs rather than reducing it. We strongly advise against using this “earthed’ or “grounding” method.

EMF shielding materials manufactured with ADR Technology do not need to be earthed. Therefore, do not cause such negative effects.

NOTES:

The ADR EMF Sol Powder is not classified as hazardous to human health and life or to the environment. Irritating to eyes. In case of eye contact, rinse with water for several minutes. After accidental ingestion, if you feel unwell, contact a doctor and point to the Material Safety Data Sheet available on the manufacturer’s website: ADR EMF Sol Powder Safety Data.

Keep away from children.

Basic composition: magnesium chloride, aluminosilicates.
Net weight: 60 g

Products using ADR Technology have received an international patent: Europe, China, the USA, Canada and more.
Gold Medal for ADR Technology in the category of “Environmental Protection – Energy”

Back to ADR EMF Protection Products.