ADR Shield for EMF & Geopathic Radiations

ADR Shield for EMF & Geopathic Radiations

ADR Shield for EMF & Geopathic Radiations

The ADR Shield for emf & geopathic radiations is a ceramic disc, 72 mm (2.5″€) in diameter and 6 mm (1/4″€) thick and serves as a device to decrease or eliminate the harmful effects of electrical components of local low frequency em fields. The Shield reduces the effects of alternating em fields with a wide range of frequencies, including the commonly used 50 & 60 Hz band. According to sources, the value of man-made alternating emf fields, especially in large cities, can be 100,000 times higher than the Earth’s natural field. The ADR EMF Shield absorbs low frequency electric fields, resulting in a harmonization within its localized radius.

 

EMF Spectrum
EMF Radiation Spectrum

Negative Geopathic radiations affect vitality and wellness. These radiations occur when there are underground water, plumbing and caverns. Further effects occur in other electronic appliances in the environment.

Is EMF Radiation a Big Deal?

EMF field strength from 1879-2019The interactions of 2 forces produce all radiation on the electromagnetic spectrum, referred to as fields. Radiation has both an electric field and a magnetic field.

Electric fields

Electric fields are the forces acting on charged particles (parts of atoms), like electrons or protons, which cause them to move. Therefore, electric current is simply the flow of electrons produced by an electric field. The strength of an electric field is often expressed as volts per meter (V/m) or, for stronger fields, as kilovolts per meter (kV/m), where a kilovolt is 1000 volts.

Magnetic fields

A magnetic field forms when charged particles are in motion. We can express the strength of a magnetic field in many different units, including tesla (T), micro-tesla (µT or one millionth of a tesla), and gauss (G), where one G equals 100 µT.

This article isn’t about proving or disproving the effects of emfs on humans or animals. This is a discussion for another time. I do believe, however, exposure time and the overall resistance of a person play a role in emerging symptoms. Every month, new studies suggest there are effects, but conventional scientists state such studies are inconclusive. Personally, I’m not sitting around and waiting for someone’s approval on the topic.

I’m for taking a proactive, safety first approach. This is why I sell devices that help improve symptom from em exposure. If you don’t believe there are any consequences from using electronic devices, I know you’re not going to read this article, anyway.

Perhaps the safest route to take is to be safe, informed, and proactive, rather than sitting back and passively consenting to being a guinea pig. To help understand why EMF exposure could be harmful, I’m going to outline the science that explains it, as well as what we can do to help eliminate the negative effects.

If you’d like to read more on emfs, read the Wellness Mama’s Blog.

The ADR Shield Reduces Effects from EMF and Geopathic Radiation Fields

ADR Shield overlay with home electronic EM emitting devicesIn normal conditions with low levels of radiation, one ADR EMF Shield will provide sufficient protection for an area of 100 sq. meters (1,100 sq. ft). To neutralize areas with high intensity of geopathic radiation, several Shields are necessary. A Tri-meter helps measure EMF fields. Alternatively, an experienced dowser will help determine the level of radiation and recommend the number of ADR Shields required as well as their locations.

To balance the home or office, place several ADR Shields in places where electronic smog is high. With the embossed side face-up, place the ADR Shield close to power supplies. The ADR Shield mitigates “dirty” energy. Further place the Shield near or under fuses or by the breaker.

In multi-floored dwellings, additional Shields one per floor is beneficial. This is necessary if vertical geopathic lines are present. In other words, if the negative emanations are arising from below and rising upward, as opposed to laterally, then placing an ADR EMF Shield on each floor will provide better results.

The ADR Shield, when placed in the fridge, energizes food. You can use the shield to energize plants and extend the life span of cut flowers by about 50%.

The ADR EMF Shield works with the design face up. Using one or more ADR Protects and ADR EMF Shields will provide the best results.

For maximum benefits, I recommend using both the ADR Protect and Shield. Use the ADR Protect on all electronic devices. Place one or more Shields in a strategic position in the home or office.

See all ADR EMF Products, HERE.

4 Responses

  1. Great job on your blog post! The content was informative, and I appreciated the practical examples you provided.

  2. Your blog post was enlightening and well-structured. I liked how you presented the topic in a comprehensive manner, covering various aspects and providing a holistic view.

Leave a Reply

Your email address will not be published. Required fields are marked *